|DOT IMPERIAL TUBE TO MALE PIPE THREAD - TEE SWIVEL BRANCH
|0 - 200Psi
|-30℃ - 250℃
HOW TO USE DOT PUSH-IN FITTINGS:
DOT push-in fittings are designed for easy use and fast installation.
To connect tube:
Cut the plastic tubing as squarely as possible. Insert the tube into the fitting until you feel the friction as the tube slides past the
O-ring. (Using a slight twisting motion while inserting the tube often helps.)
Once you feel this friction, continue to push the tube inward until it bottoms firmly against the internal tube stop.
To disconnect tube:
With thumb and forefinger, hold the top of the insert down against the fitting body and, with the other hand, pull out the tubing.
No tools are needed.